2.齒輪軸 Pinion

鍍鎳合金鋼、高精密一體式輸出軸同時符合NAMUR、ISO5211、DIN3337標準?？筛鶕?jù)客戶要求定制尺寸和不銹鋼材料。

The pinion is high-precision and integrative,made fromnickelled-alloy steel,full conform to the lastest standards ofISO5211,DIN3337,NAMUR.The dimensions can be customizedand the stainless steel is available.

3.缸體 Actuator Body

ASTM6005壓鑄鋁合金缸體可以采用硬質氧化、環氧樹脂噴涂(根據要求噴涂蘭色、橙色、黃色等)、PTFE涂層或鍍鎳滿足不同要求。

According to the different requirements,the extrydedaluminum alloy ASTM6005 Body can be treated with hardanodized,powder polyester painted (different colours isavailable such as blue,orange,yellow etc.),PTFE or Nickel plated.

4.端蓋 End caps

壓鑄鋁合金表面金屬粉末噴涂各種顏色、PTFE涂層或鍍鎳處理

Die-casting aluminum powder polyester painted indifferent colours,PTFE or Nickel plated.

端蓋顏色

5.活塞 Pistons

雙活塞齒條、采用鑄鋁硬質氧化或者鑄鋼鍍鋅處理，安裝位置對稱、運作迅速、使用壽命長，簡單的顛倒活塞可以改變旋轉方向。

The twin rack pistons are made from Die-casting aluminumtreated with hard anodized or made from cast steel withgalvanization.Symmetric mounting position,long cycle lifeand fast operation,reversing rotation by simply inverting the

6.行程調節 Trabel adjustment

兩個獨立的行程調節螺釘可以進行方便精確土5°的調節開關位置

The two independent external travel stop adjustment bolts can adjust +5° at both open and close directions easily and precisely.

7.高性能彈簧 High performance springs

采用優質材料、涂層處理、預壓裝配。具有較強的抗腐蝕性和使用壽命。能夠按期、簡單的拆卸單作用執行器通過改變彈簧數量滿足不，同的力矩輸出范圍。Preloaded coatingsprings are made from the high qualitymaterial for resistant to corrosion and longer service lifewhich can be ,demounted safely and conveniently tosatisfy requirement of torque by changing quantity of springs.

8.軸承、導板Bearing&Guides

采用低摩擦、長壽命復合材料，避免了金屬與金屬的直接接觸，維修更換簡單方便。

Made from low friction,long-life compound material,to avoidthe direct contact between metals. The maintenance andreplacement are easy and convenient.

9.密封 O-rings

在常溫工作條件下使用丁晴橡膠溫度是:-20°C~+80℃

在高溫使用氟橡膠溫度是:-15°C~+150°C

在低溫使用硅橡膠溫度是:-60℃~+80°C

Temperature conditions to use NBR:-20℃~+80°C

In High temperature conditions to use Viton:-15℃~+150℃

In Low temperaturc conditions to use Siliconc:-60°C~+80°C