雙偏心蝶閥   

Double Eccentric Butterfly Valve

高性能蝶閥是本公司自行研制并引進歐洲先進技術轉化產品。該蝶閥具有超獨特的產品結構，超可靠的密封性能，超廣闊的工況條件，超低小的操作扭矩，超長久的使用壽命，特殊工況安全防火，同類產品處于世界領先地位。

High performance butterfly valve is our company's own design product whichapply European advanced technologyThis butterfly valve has a uniquestructure with ultra reliable sealing performance, ultra wide working conditions.ultraow operating torque, ultra long service life, fire safe in special conditions.The high performance butterfly valve has aleading position compare to similarproducts around the world.

該系列高性能對夾式蝶閥使用多種結構材料，包括符合NACE要求和抗磨蝕的。并可提供用于氯氣、氧氣、高真空和腐蝕生介質及低溫環境的特殊閥門。

The series of high performance wafer type butterfly,valves uses variousstructure materials,including those thatmeet NACE reguirements andanticorrosive materials.Special valves that can be used in chlorine,oxygen,high vacuumcorrosive media and cryogenic condition are also available.

特點 Features

-使用獨特的動載密封PTFE閥座設計，彈性好，可靠性高;

-無須增加O形圈或金屬部件來保持密封;

-唇緣式密封結構可補償溫度和壓力的變化;

-使用壽命長，維修量小;

-密封試驗，雙向達到無氣泡泄露。 - The unique dynamic load seal PTFE seat design is adopted with goodelasticity and high reliability.

-Sealing can be maintained without the need of adding 0 ring or metalpart.

-The lip type sealing structure can compensate for the changes oftemperature and pressure.

-Long service life and low maintenance. - In seal test, there is no bubble and leakage at both directions.

偏置軸和偏心蝶板設計

Design of offset shaft and eccentric butterfly plate

-在開啟和處于中間位置時閥座與蝶板不發生接觸;

-在閥座上下部位無磨損點; 扭矩低，操作機構要求??； - The seat and butterfly plate do not contact each other when thevalve is opened or at the middle position.

- There is no wear point at the upper and lower parts of the seat.

- Low torque with low requirement for operating mechanism.

耐火結構 Fire resistant structure

耐火型閥門按API607經過火燒試驗

The fire resistant type valve is subjected to fire test according to API 607

閩座類型 Seat type

PTFE、R-PTFE、防火閥座等PTFE, R-PTFE, Fireproof seat, etc.

軸的固定可靠 Reliable fixing of shaft

軸的頂端有防吹出結構，在軸意外斷裂時防止軸的上部移竄出壓蓋。

The anti-blow-out structure is provided at the top of the shaft to prevent the shaft from running out of the gland in case of accidental breaking of the shaft.

閥座維像保養方便 Convenient seat mainlenance and servicing

只要取下嵌件即可更換閥座，不必拆卸蝶閥和軸

The seat can be replaced just through removing the inserts without theneed of disassembling the butterfly valve and shaft

斷流和控制兼?zhèn)?Provided wilh shut-aff and control functions

-具有優良的控特性;

-流量特性曲線等比變化;

-調節范圍廣;

- 即使用于控制仍能緊密密封 。

- Having excellent control characteristics

- Proportional change of flow characteristic curve

- Wde adjusting range

- Tight sealing can be realized even when it is used for contral.

額定值

Rated value

闊座額定值

曲線上表示的閥座額定值只對閥座而言，是基于閥門全閉是蝶閥兩端的壓差。這些額定值可作為通用條件下使用指南。依據以往經驗，經過改進和變換其他閥座材料，使用的額定值可更高。

Seat rated value

The seat rated values indicated on the curve are only for the seat. lt is thedifferential pressure between the two ends of the butterfly valve when the valveis fully closed. These rated values can serve as use guide under generaconditions. According to past experience, the rated values for improved andchanged other seat materials may be higher.

閥體額定值

閥體的最大工作壓力和各種材料閥體的試驗壓力示于下面的閥體壓力額定值表中。實際工況使用壓力要根據閥座額定值來決定。

Body rated value

The maximum working pressure of body and testing pressure of body ofvarious materials are listed in the body pressure ratings table. The actualworking pressure in the working conditions shall be decided according tothe seat rated values.